1 / 6

Hydrexx Vaporiser

Vaporisers

The Hydrexx™ indirect heated vaporizer fills the critical niche where 3-phase power is lacking or an open flame is inappropriate. It uses hot water from a hydronic boiler or excess process heat as the heating medium.

Available in three models: HX160 (160 kg/hr), HX320 (320 kg/hr), and HX500 (500 kg/hr). Design pressure: 250 psig (17.2 barg).

Features include corrosion-resistant stainless steel tubes with aluminum shell, proprietary Liqui-SAFE™ valve with visual activation indicator, compact footprint, and start-up in 1–5 minutes.

Enquire

Models & Variants

3 models

Model	Capacity	Electrical Requirements	Shipping Weight
HYDREXX 160kg/hr	160 kg/hr	None required (hot water heated)	61 kg
HYDREXX 320kg/hr	320 kg/hr	None required (hot water heated)	61 kg
HYDREXX 500kg/hr	500 kg/hr	None required (hot water heated)	61 kg

Spare Parts & Repair Kits

Repair Kits

Part Number	Name
40787	Contactor Kit XP/XPV/XPM
40900	Rpr Kit Slnd Euro ATEX PN34900
41112	Fisher 627 High temp seal kit
80896	Electrical Seal Kit ATEX - CE

Service Parts

Part Number	Name
2202-4013	Peltier Module - Pre wired SS
2202-5017	Seal Temp Sw Band end
2202-7003	SS Wiring Harness
2203-5026	Seal Cabinet end seal
34900	Solenoid Valve 3/4" EXP 230V
34950	Gland Cable 1/2" Non-armored Ex "d' Zone1
35077	Valve Sol. 1/2" 208-240V/50Hz
40671	Use 33958 JBox 3/4"NPT ATEX
40758	Thermal Grease Kit SS 10gm
40759	Extended Anchor Plate (pair)
45009	SS Temperature & Pressure Switch
8055-101	Calorimeter Strainer 1/4" - for GA500W
8145-111	GA500 fascia valve